Safety Grip Tape

Safety tape is used anywhere where a slip risk is possible such as walkways, ramps and treads. The silicon carbide resin carrier with a a self adhesive backing, gives a heavy duty slip resistant surface.

Safety-Grip™

Ideal for hard wearing, industrial and utility use. Can be made to any size, shape, colour, grade or width.

Black Standard Black Coarse B X-Coarse Red Yellow Standard Yellow Coarse Blue Green Grey Brown White Transparent       Fluorescent Yellow

Glow in the dark SAfety-Grip™

Provides an excellent photoluminescent capability. Can be recharged by natural or artificial sources.

Hazard Glow in the dark Plain Glow in the dark Striped Glow in the dark

Production Cushion

Provides an excellent anti-slip surface with a comfort cushion texture.

H-4644 H-3418

Conformable SAfety-Grip™

Ideal for use on irregular surfaces and can be hammered into place. Especially good for use on Chequer plate or Durbar plate.

Black Conformable Yellow Conformable Hazard Conformable

Non-Abrasive

Ideal for showers, boats and in food safety areas.

White Aqua-Safe Black Aqua-Safe Transparent Aqua-Safe Grey Aqua-Safe Beige Aqua-Safe Black Resilient Yellow Resilient Black Coarse Resilient Grey Coarse Resilient   Grey Cushion Grip

Safety-Grip ™ Hazard

Black/Yellow Hazard Red/White Hazard

Roll Sizes

• 25mm x 18.3m / 1" x 60'
• 51mm x 18.3m / 2" x 60'
• 102mm x 18.3m / 4" x 60'
• 153mm x 18.3m / 6" x 60'
• 305mm x 18.3m / 12" x 60'
• 609mm x 18.3m / 24" x 60'

Primer is supplied in 1 litre tins (5 sq/m approximate coverage per tin). Edge fix is supplied in 5oz tubes (1 tube is needed per roll).

Installation

Surfaces must be free from oil, water and dust. An application of primer to the surface is recommended prior to adhering safety grip tape in order to prevent any water penetration, especially in outdoor locations. Edge fix is also recommended to seal all edges.

Sitemap